Open Science Research Excellence

Open Science Index

Commenced in January 2007 Frequency: Monthly Edition: International Publications Count: 30455


Select areas to restrict search in scientific publication database:
10000550
Copolymers of Pyrrole and α,ω-Dithienyl Terminated Poly(ethylene glycol)
Abstract:
This work presents synthesis of α,ω-dithienyl terminated poly(ethylene glycol) (PEGTh) capable for further chain extension by either chemical or electrochemical polymeriztion. PEGTh was characterized by FTIR and 1H-NMR. Further copolymerization of PEGTh and pyrrole (Py) was performed by chemical oxidative polymerization using ceric (IV) salt as an oxidant (PPy-PEGTh). PEG without end group modification was used directly to prepare copolymers with Py by Ce (IV) salt (PPy-PEG). Block copolymers with mole ratio of pyrrole to PEGTh (PEG) 50:1 and 10:1 were synthesized. The electrical conductivities of copolymers PPy-PEGTh and PPy-PEG were determined by four point probe technique. Influence of the synthetic route and content of the insulating segment on conductivity and yield of the copolymers were investigated.
Digital Object Identifier (DOI):

References:

[1] S. Ahmad, S. S. Gursoy, S. Kazim, A. Uygun, “Growth of N-substituted polypyrrole layers in ionic liquids: Synthesis and its electrochromic properties”, Solar Energy Materials & Solar Cells, vol. 99, pp. 95–100, 2012.
[2] J. F. Mike, J. L. Lutkenhaus,“Recent advances in conjugated polymer energy storage”, Journal of Polymer Science, Part B: Polymer Physics, vol. 51, pp. 468–480, 2013.
[3] R. Holze and Y. P. Wu, “Intrinsically conducting polymers in electrochemical energy technology: Trends and progress”, ElectrochimicaActa, vol. 122, pp. 93–107, 2014.
[4] P. S. Sharma, A. Pietrzyk-Le, F. D’Souza, W. Kutner, “Electrochemically synthesized polymers in molecular imprinting for chemical sensing”, Anal. Bioanal. Chem., 402:3177–3204, 2012.
[5] S. T. Navale, A. T. Mane, M. A. Chougule, R. D. Sakhare, S. R. Nalage, V. B. Patil, “Highly selective and sensitive room temperature NO2 gas sensorbased on polypyrrole thin films”,Synthetic Metals, vol. 189, pp. 94–99, 2014.
[6] J. Li, H. Xie and Y. Li, “Fabrication of gold nanoparticles/polypyrrole composite-modified electrode for sensitive hydroxylamine sensor design”, J. Solid State Electrochem., vol. 16, pp. 795–802, 2012.
[7] X. Liang , Y. Cheng and C. Qi, Polypyrrole based strong acid catalyst for acetalization, Solid State Sciences, vol. 13, pp. 1820-1824, 2011.
[8] J. Wang, J. Wang , Z. Wang and S. Wang, “Electrocatalytic oxidation of ascorbic acid at polypyrrole nanowire modified electrode”, Synthetic Metals, vol. 156, pp. 610–613, 2006.
[9] W. Zheng, G. Alici, P. R. Clingan, B. J. Munro, G. M. Spinks, J. R. Steele, G. G. Wallace, “Polypyrrole stretchable actuators”, Journal of Polymer Science Part B: Polymer Physics, vol. 51, pp. 57–63, 2013.
[10] Y. Wang and X. Jing, “Intrinsically conducting polymers for electromagnetic interference shielding”, Polym. Adv. Technol., vol. 16, pp. 344–351, 2005.
[11] D. Das, K. Sen and S. Maity, “Studies on electro-conductive fabrics prepared by in situ chemical polymerization of mixtures of pyrrole and thiophene onto polyester”, Fibers and Polymers, vol.14, (3), pp. 345-351, 2013.
[12] P. Zarras, N. Anderson, C. Webber, D. J. Irvin, J. A. Irvin, A. Guenthner and J. D. Stenger-Smith, “Progress in using conductive polymers as corrosion-inhibiting coatings”, Radiation Physics and Chemistry, vol. 68, pp. 387–394, 2003.
[13] M. I. Khan, A. U. Chaudhry, S. Hashim, M. K. Zahoor and M. Z. Iqbal, “Recent developments in intrinsically conductive polymer coatings for corrosion protection”, Chemichal Engineering Research Bulletin, vol. 14, pp. 73–86, 2010.
[14] M. Shabani-Nooshabadi, S. M. Ghoreishi, Y. Jafari and N. Kashanizadeh, “Electrodeposition of polyaniline-montmorrilonite nanocomposite coatings on 316L stainless steel for corrosion prevention”, Journal ofPolymer Research, vol. 21: 416 , 2014.
[15] W. M. Sigmund, G. Weerasekera, C. Marestin,S. Styron,H. Zhou,M. Z. Elsabee,J. Rühe, G. Wegner,and R. S. Duran, “Polymerization of monolayers of 3-substituted pyrroles”, Langmuir, vol. 15, pp.6423-6427, 1999.
[16] J. Stejskal, M. Omastová, S. Fedorova, J. Prokeš, and M. Trchova,, “Polyaniline and polypyrrole prepared in the presence of surfactants: a comparative conductivity study”, Polymer, vol. 44, pp. 1353–1358, 2003.
[17] A. Kaynak, L. Rintoul and G. A. George, “Change of mechanical and electrical properties of polypyrrole films with dopant concentration and oxidative aging”,Materials Research Bulletin, vol. 35, pp. 813-824, 2000.
[18] S. P. Armes, M. Aldissi, G. C. Idzorek, P. W. Keaton, L. J. Rowton, G. L. Stradling, M. T. Collopy, and D. B. McColl, “Particle size distributions of polypyrrole colloids” Journal of Colloid and Interface Science, vol.141 (1), pp. 119–126, 1991.
[19] X. Li, X. Zhang and Li, H., “Preparation and characterization of pyrrole/aniline copolymer nanofibrils using the template–synthesis method”, Journal of Applied Polymer Science, vol. 81, pp. 3002–3007, 2001.
[20] X. Li, M. Lu and Li H., “Electrochemical copolymerization of pyrrole and thiophenenanofibrils using template–synthesis method”,Journal of Applied Polymer Science, vol. 86, pp. 2403–2407, 2002.
[21] N. Li, D. Shan and H.Xue,“Electrochemical synthesis and characterization of poly(pyrrole–co–tetrahydrofuran) conducting copolymer”, European Polymer Journal, vol. 43, pp. 2532–2539, 2007.
[22] N. Ballav and M. Biswas, “A conducting nanocomposite via intercalative polymerisation of thiophene in montmorillonite clay”, Synthetic Metals, vol. 142, pp. 309–315, 2004.
[23] H. K. Song and G. T. R. Palmore, “Conductive polypyrrole via enzyme catalysis”,J. Phys. Chem.B, vol. 109, pp. 19278–19287, 2005.
[24] A. Ramanaviciene, W. Schuhmann and A.Ramanavicius, “AFM study of conducting polymer polypyrrole nanoparticles formed by redox enzyme–glucose oxidase–initiated polymerization”, Colloids and Surfaces B: Biointerfaces, vol. 4, pp. 159–166, 2006.
[25] K. Kijewska, G. J. Blanchard, J. Szlachetko, J. Stolarski, A. Kisiel, A. Michalska, K. Maksymiuk, M. Pisarek, P. Majewski, P. Krysinski and M. Mazur, “Photopolymerized polypyrrole microvessels”,Chem. Eur. J., vol.18, pp. 310–320, 2012.
[26] H. R. Heydarnezhad and B. Pourabbas, “One–step synthesis of conductive ceria/polypyrrole nanocomposite particles via photo–induced polymerization method”, J. Mater. Sci.: Mater. Electron., vol. 24, pp. 4378–4385, 2013.
[27] A. T. Lawal and G. G. Wallace, “Vapour phase polymerisation of conducting and non-conducting polymers: A review”, Talanta, vol. 119, pp. 133-143, 2014.
[28] D. Bhattacharyya, R. M. Howden, D. C. Borrelli and K. K. Gleason, “Vapor phase oxidative synthesis of conjugated polymersand applications”, Journal of Polymer Science Part B: Polymer Physics, vol. 50, pp. 1329–1351, 2012.
[29] M. Omastová and F. Simon, “Surface characterizations of conductive poly(methyl methacrylate)/polypyrrole composites”, Journal of Materials Science, vol. 35, pp. 1743–1749, 2000.
[30] H. Acar, M. Karakışla and M. Saçak, “Potassium persulfate-mediated preparation of conducting polypyrrole/polyacrylonitrile composite fibers: Humidity and temperature-sensing properties”, Journal of Applied Polymer Science, vol. 125, pp. 3977–3985, 2012.
[31] C. Unsal, F. Kalaoglu, H. Karakas and A. S. Sarac, “Polypyrrole/poly(acrylonitrile–co–butyl acrylate) composite”,Advances in Polymer Technology, vol. 32 (S1), pp. E784–E792, 2013.
[32] A. Shakoor, P. J. S. Foot and T. Z. Rizvi, “Conductive poly(methyl methacrylate)–polypyrroledodecylbenzenesulfonate (PMMA–PPy.DBSA) blends prepared in solution in the presence of hydroquinone”, J. Mater. Sci: Mater. Electron., vol. 21, pp. 1270–1276, 2010.
[33] M. Ferenets and A. Harlin, “Chemical in situ polymerization of polypyrrole on poly(methyl metacrylate) substrate”, Thin Solid Films, vol. 515, pp. 5324–5328, 2007.
[34] F. Huijs and J. Lang, “Morphology and film formation of poly(butyl methacrylate)–polypyrrole core–shell latex particles”, Colloid Polym. Sci., vol. 278, pp. 746–756, 2000.
[35] D. Zhang, Q. Zhang, X. Gao, and G. Piao, “A nanocellulosepolypyrrole composite based on tunicate cellulose”,International Journal of Polymer Science, 2013, pp. 1–6, 2013.
[36] J. Li, X.-R. Qian, J.-H. Chen, C.-Y. Ding, and X.-H. An, “Conductivity decay of cellulose–polypyrrole conductive paper composite prepared by in situ polymerization method”, Carbohydrate Polymers, 82, 504–509, 2010.
[37] M. Micˇušík, M. Omastová, J. Prokeš, and I. Krupa, “Mechanical and electrical properties of composites based on thermoplastic matrices and conductive cellulose fibers”, Journal of Applied Polymer Science, vol. 101, pp. 133–142, 2006.
[38] S. Bousalem, C. Mangeney, Y. Alcote, M.M. Chehimi, T. Basinska and S. Slomkowski, “Immobilization of proteins onto novel, reactive polypyrrole–coated polystyrene latex particles”, Colloids and Surfaces A: Physicochem. Eng. Aspects, vol. 249, pp. 91–94, 2004.
[39] X.-J. Xu, L.-M. Gan, K.-S. Siow and M.-K. Wong, “Synthesis and characterization of nanosizedpolypyrrole–polystyrene composite particles”, Journal of Applied Polymer Science, vol. 91, pp. 1360–1367, 2004.
[40] J. M. Lee, D. G. Lee, S. J. Lee, and J. H. Kim, “One–step synthetic route for conducting core–shell poly(styrene/pyrrole) nanoparticles”, Macromolecules, vol. 42, pp. 4511–4519, 2009.
[41] M. Han, K. Zhao, Y. Zhang, Z. Chen, and Y. Chu, Dielectric properties of polystyrene–polypyrrole core–shell conducting spheres suspended in aqueous solution, Colloids and Surfaces A: Physicochem. Eng., vol. 302, pp. 174–180, 2007.
[42] Z. Huang, C. Wang, Y. Li, and Z. Wang, “Controlled preparation of core–shell polystyrene/polypyrrole nanocomposite particles by a swelling–diffusion–interfacial polymerization method”, Colloid Polym. Sci., vol. 290, pp. 979–985, 2012.
[43] C. R.Broda, J. Y. Lee, S. Sirivisoot, C. E. Schmidt and B. S. Harrison, “A chemically polymerized electrically conducting composite of polypyrrole nanoparticles and polyurethane for tissue engineering”, J. Biomed. Mater. Res. Part A, 98A, 509–516, 2011.
[44] G. Çakmak, Z. Küçükyavuz, and S. Küçükyavuz, “Flexible and conducting composites of polypyrrole and polydimethylsiloxane”, Journal of Applied Polymer Science, vol. 93, pp. 736–74, 2004.
[45] W.-I. Son, J.-M. Hong, and B.-S. Kim, “Polypyrrole composite membrane with high permeability prepared by interfacial polymerization”, Korean J. Chem. Eng., vol. 22 (2), pp. 285–290, 2005.
[46] C. Pirvu, C. C. Manole, A. B. Stoian, I. Demetrescu, “Understanding of electrochemical and structural changes of polypyrrole/polyethylene glycol composite films in aqueous solution”, ElectrochimicaActa, vol. 56, pp. 9893– 9903, 2011.
[47] Y.-C. Liu and B.-J. Hwang, “Enhancement of conductivity stability of polypyrrole films modified by valence copper and polyethylene oxide in an oxygen atmosphere”, Thin Solid Films, vol. 360, pp. 1–9, 2000.
[48] L. M. Yee, H. N. M. E. Mahmud, A. Kassim, and W. M. M. Yunus, “Polypyrrole–polyethylene glycol conducting polymer composite films: Preparation and characterization” Synthetic Metals, vol. 157, pp. 386–389, 2007.
[49] H. Eisazadeh, “Studying the characteristics of polypyrrole and its composites”, World Journal of Chemistry, vol. 2 (2), pp. 67–74, 2007.
[50] S. Nair, S. Natarajan, and S. H. Kim, “Fabrication of electrically conducting polypyrrole–poly(ethylene oxide) composite nanofibers”, Macromol. Rapid Commun., vol. 26, pp. 1599–1603, 2005.
[51] C. Jérôme, L. Martinot and R. Jérôme, “Ion–exchange properties of polypyrrole doped by –carboxylatedpolyethyleneoxide”, Synthetic Metals, vol. 105, pp. 65–71, 1999.
[52] K. M. Sivaraman, B. Özkale, O. Ergeneman, T. Lühmann, G. Fortunato, M. A. Zeeshan, B. J. Nelson and S. Pané, “Redox cycling for passive modification of polypyrrole surface properties: Effects on cell adhesion and proliferation”, Adv. Healthcare Mater., vol. 2, pp. 591–598, 2013.
[53] H. K. Lim, S. O. Lee, K. J. Song, S. G. Kim, and K. H. Kim, “Synthesis and properties of soluble polypyrrole doped with dodecylbenzenesulfonate and combined with polymeric additive poly(ethylene glycol)”, Journal of Applied Polymer Science, vol. 97, pp. 1170–1175, 2005.
[54] O. Y. Posudievsky, O. A. Kozarenko, V. S. Dyadyun, S. W. Jorgensen, J. A. Spearot, V.G. Koshechko and V. D. Pokhodenko, “Mechanochemically prepared ternary hybrid cathode material for lithium batteries”, ElectrochimicaActa, vol. 109, pp. 866-873, 2013.
[55] S. D. V. Luebben, B. Elliott, and C. Wilson, “Poly(heteroaromatic) block copolymers with electrical conductivity”,US Patent 7 279 534 B2, 2007.
[56] H. B. Yildiz, S. Kiralp, L. Toppare, Y. Yagci and K. Ito, “Synthesis of conducting copolymers of thiophene capped poly(ethylene oxide) with pyrrole and thiophene”,Materials Chemistry and Physics, vol. 100 (1), pp. 124-127, 2006.
[57] S. Gabriel, M. Ce´cius, K. Fleury-Frenette, D. Cossement, M. Hecq, N. Ruth, R. Jérôme, and C. Jérôme,“Synthesis of adherent hydrophilic polypyrrole coatings onto (semi)conducting surfaces”,Chem. Mater.,vol.19, pp. 2364–2371, 2007.
Vol:14 No:05 2020Vol:14 No:04 2020Vol:14 No:03 2020Vol:14 No:02 2020Vol:14 No:01 2020
Vol:13 No:12 2019Vol:13 No:11 2019Vol:13 No:10 2019Vol:13 No:09 2019Vol:13 No:08 2019Vol:13 No:07 2019Vol:13 No:06 2019Vol:13 No:05 2019Vol:13 No:04 2019Vol:13 No:03 2019Vol:13 No:02 2019Vol:13 No:01 2019
Vol:12 No:12 2018Vol:12 No:11 2018Vol:12 No:10 2018Vol:12 No:09 2018Vol:12 No:08 2018Vol:12 No:07 2018Vol:12 No:06 2018Vol:12 No:05 2018Vol:12 No:04 2018Vol:12 No:03 2018Vol:12 No:02 2018Vol:12 No:01 2018
Vol:11 No:12 2017Vol:11 No:11 2017Vol:11 No:10 2017Vol:11 No:09 2017Vol:11 No:08 2017Vol:11 No:07 2017Vol:11 No:06 2017Vol:11 No:05 2017Vol:11 No:04 2017Vol:11 No:03 2017Vol:11 No:02 2017Vol:11 No:01 2017
Vol:10 No:12 2016Vol:10 No:11 2016Vol:10 No:10 2016Vol:10 No:09 2016Vol:10 No:08 2016Vol:10 No:07 2016Vol:10 No:06 2016Vol:10 No:05 2016Vol:10 No:04 2016Vol:10 No:03 2016Vol:10 No:02 2016Vol:10 No:01 2016
Vol:9 No:12 2015Vol:9 No:11 2015Vol:9 No:10 2015Vol:9 No:09 2015Vol:9 No:08 2015Vol:9 No:07 2015Vol:9 No:06 2015Vol:9 No:05 2015Vol:9 No:04 2015Vol:9 No:03 2015Vol:9 No:02 2015Vol:9 No:01 2015
Vol:8 No:12 2014Vol:8 No:11 2014Vol:8 No:10 2014Vol:8 No:09 2014Vol:8 No:08 2014Vol:8 No:07 2014Vol:8 No:06 2014Vol:8 No:05 2014Vol:8 No:04 2014Vol:8 No:03 2014Vol:8 No:02 2014Vol:8 No:01 2014
Vol:7 No:12 2013Vol:7 No:11 2013Vol:7 No:10 2013Vol:7 No:09 2013Vol:7 No:08 2013Vol:7 No:07 2013Vol:7 No:06 2013Vol:7 No:05 2013Vol:7 No:04 2013Vol:7 No:03 2013Vol:7 No:02 2013Vol:7 No:01 2013
Vol:6 No:12 2012Vol:6 No:11 2012Vol:6 No:10 2012Vol:6 No:09 2012Vol:6 No:08 2012Vol:6 No:07 2012Vol:6 No:06 2012Vol:6 No:05 2012Vol:6 No:04 2012Vol:6 No:03 2012Vol:6 No:02 2012Vol:6 No:01 2012
Vol:5 No:12 2011Vol:5 No:11 2011Vol:5 No:10 2011Vol:5 No:09 2011Vol:5 No:08 2011Vol:5 No:07 2011Vol:5 No:06 2011Vol:5 No:05 2011Vol:5 No:04 2011Vol:5 No:03 2011Vol:5 No:02 2011Vol:5 No:01 2011
Vol:4 No:12 2010Vol:4 No:11 2010Vol:4 No:10 2010Vol:4 No:09 2010Vol:4 No:08 2010Vol:4 No:07 2010Vol:4 No:06 2010Vol:4 No:05 2010Vol:4 No:04 2010Vol:4 No:03 2010Vol:4 No:02 2010Vol:4 No:01 2010
Vol:3 No:12 2009Vol:3 No:11 2009Vol:3 No:10 2009Vol:3 No:09 2009Vol:3 No:08 2009Vol:3 No:07 2009Vol:3 No:06 2009Vol:3 No:05 2009Vol:3 No:04 2009Vol:3 No:03 2009Vol:3 No:02 2009Vol:3 No:01 2009
Vol:2 No:12 2008Vol:2 No:11 2008Vol:2 No:10 2008Vol:2 No:09 2008Vol:2 No:08 2008Vol:2 No:07 2008Vol:2 No:06 2008Vol:2 No:05 2008Vol:2 No:04 2008Vol:2 No:03 2008Vol:2 No:02 2008Vol:2 No:01 2008
Vol:1 No:12 2007Vol:1 No:11 2007Vol:1 No:10 2007Vol:1 No:09 2007Vol:1 No:08 2007Vol:1 No:07 2007Vol:1 No:06 2007Vol:1 No:05 2007Vol:1 No:04 2007Vol:1 No:03 2007Vol:1 No:02 2007Vol:1 No:01 2007