Open Science Research Excellence

Open Science Index

Commenced in January 2007 Frequency: Monthly Edition: International Publications Count: 30662

Select areas to restrict search in scientific publication database:
Effect of Curing Temperature on Mechanical Properties of Jute Fiber Reinforced Polylactic Acid Based Green Composite
Global warming, growing awareness of the environment, waste management issues, dwindling fossil resources, and rising oil prices resulted to increase the research in the materials that are friendly to our health and environment. Due to these reasons, green products are increasingly being promoted for sustainable development. In this work, fully biodegradable green composites have been developed using jute fibers as reinforcement and poly lactic acid as matrix material by film stacking technique. The effect of curing temperature during development of composites ranging from 160 °C, 170 °C, 180 °C and 190 °C was investigated for various mechanical properties. Results obtained from various tests indicate that impact strength decreases with an increase in curing temperature, but tensile and flexural strength increases till 180 °C, thereafter both the properties decrease. This study gives an optimum curing temperature for the development of jute/PLA composites.
Digital Object Identifier (DOI):


[1] P. K. Bajpai, I. Singh, and J. Madaan, “Development and characterization of PLA-based green composites: A review,” J. Thermoplast. Compos. Mater., vol. 27, no. 1, pp. 52–81, Mar. 2012.
[2] L. Yan, N. Chouw, and X. Yuan, “Improving the mechanical properties of natural fibre fabric reinforced epoxy composites by alkali treatment,” J. Reinf. Plast. Compos., vol. 31, no. 6, pp. 425–437, Feb. 2012.
[3] P. K. Bajpai, I. Singh, and J. Madaan, “Comparative studies of mechanical and morphological properties of polylactic acid and polypropylene based natural fiber composites,” J. Reinf. Plast. Compos., vol. 31, no. 24, pp. 1712–1724, Oct. 2012.
[4] V. Dhawan, S. Singh, and I. Singh, “Effect of Natural Fillers on Mechanical Properties of GFRP Composites,” J. Compos., vol. 2013, pp. 1–8, 2013.
[5] V. Dhawan, K. Debnath, I. Singh, and S. Singh, “Prediction of Forces during Drilling of Composite Laminates Using Artificial Neural Network: A New Approach,” no. January, 2015.
[6] J. Inder, P. Singh, S. Singh, and V. Dhawan, “Effect of Curing Temperature on Mechanical Properties of Natural Fiber Reinforced Polymer Composites Effect of Curing Temperature on Mechanical Properties of Natural Fiber Reinforced Polymer Composites,” J. Nat. Fibers, vol. 00, no. 00, pp. 1–10, 2017.
[7] A. Gomes, “Development and effect of alkali treatment on tensile properties of curaua fiber green composites,” vol. 38, pp. 1811–1820, 2007.
[8] B. K. Goriparthi, K. N. S. Suman, and N. Mohan Rao, “Effect of fiber surface treatments on mechanical and abrasive wear performance of polylactide/jute composites,” Compos. Part A Appl. Sci. Manuf., vol. 43, no. 10, pp. 1800–1808, Oct. 2012.
[9] T. S. Lee, H. Y. Choi, H. N. Choi, K.-Y. Lee, S.-H. Kim, S. G. Lee, and D. K. Yong, “Effect of surface treatment of ramie fiber on the interfacial adhesion of ramie/acetylated epoxidized soybean oil (AESO) green composite,” J. Adhes. Sci. Technol., vol. 27, no. 12, pp. 1335–1347, 2013.
[10] P. Saenghirunwattana, A. Noomhorm, and V. Rungsardthong, “Mechanical properties of soy protein based ‘green’ composites reinforced with surface modified cornhusk fiber,” Ind. Crops Prod., vol. 60, pp. 144–150, Sep. 2014.
[11] J. Inder, P. Singh, V. Dhawan, S. Singh, and K. Jangid, “ScienceDirect Study of Effect of Surface Treatment on Mechanical Properties of Natural Fiber Reinforced Composites,” Mater. Today Proc., vol. 4, no. 2, pp. 2793–2799, 2017.
[12] S. Oza, H. Ning, I. Ferguson, and N. Lu, “Effect of surface treatment on thermal stability of the hemp-PLA composites: Correlation of activation energy with thermal degradation,” Compos. Part B Eng., vol. 67, pp. 227–232, 2014.
Vol:14 No:09 2020Vol:14 No:08 2020Vol:14 No:07 2020Vol:14 No:06 2020Vol:14 No:05 2020Vol:14 No:04 2020Vol:14 No:03 2020Vol:14 No:02 2020Vol:14 No:01 2020
Vol:13 No:12 2019Vol:13 No:11 2019Vol:13 No:10 2019Vol:13 No:09 2019Vol:13 No:08 2019Vol:13 No:07 2019Vol:13 No:06 2019Vol:13 No:05 2019Vol:13 No:04 2019Vol:13 No:03 2019Vol:13 No:02 2019Vol:13 No:01 2019
Vol:12 No:12 2018Vol:12 No:11 2018Vol:12 No:10 2018Vol:12 No:09 2018Vol:12 No:08 2018Vol:12 No:07 2018Vol:12 No:06 2018Vol:12 No:05 2018Vol:12 No:04 2018Vol:12 No:03 2018Vol:12 No:02 2018Vol:12 No:01 2018
Vol:11 No:12 2017Vol:11 No:11 2017Vol:11 No:10 2017Vol:11 No:09 2017Vol:11 No:08 2017Vol:11 No:07 2017Vol:11 No:06 2017Vol:11 No:05 2017Vol:11 No:04 2017Vol:11 No:03 2017Vol:11 No:02 2017Vol:11 No:01 2017
Vol:10 No:12 2016Vol:10 No:11 2016Vol:10 No:10 2016Vol:10 No:09 2016Vol:10 No:08 2016Vol:10 No:07 2016Vol:10 No:06 2016Vol:10 No:05 2016Vol:10 No:04 2016Vol:10 No:03 2016Vol:10 No:02 2016Vol:10 No:01 2016
Vol:9 No:12 2015Vol:9 No:11 2015Vol:9 No:10 2015Vol:9 No:09 2015Vol:9 No:08 2015Vol:9 No:07 2015Vol:9 No:06 2015Vol:9 No:05 2015Vol:9 No:04 2015Vol:9 No:03 2015Vol:9 No:02 2015Vol:9 No:01 2015
Vol:8 No:12 2014Vol:8 No:11 2014Vol:8 No:10 2014Vol:8 No:09 2014Vol:8 No:08 2014Vol:8 No:07 2014Vol:8 No:06 2014Vol:8 No:05 2014Vol:8 No:04 2014Vol:8 No:03 2014Vol:8 No:02 2014Vol:8 No:01 2014
Vol:7 No:12 2013Vol:7 No:11 2013Vol:7 No:10 2013Vol:7 No:09 2013Vol:7 No:08 2013Vol:7 No:07 2013Vol:7 No:06 2013Vol:7 No:05 2013Vol:7 No:04 2013Vol:7 No:03 2013Vol:7 No:02 2013Vol:7 No:01 2013
Vol:6 No:12 2012Vol:6 No:11 2012Vol:6 No:10 2012Vol:6 No:09 2012Vol:6 No:08 2012Vol:6 No:07 2012Vol:6 No:06 2012Vol:6 No:05 2012Vol:6 No:04 2012Vol:6 No:03 2012Vol:6 No:02 2012Vol:6 No:01 2012
Vol:5 No:12 2011Vol:5 No:11 2011Vol:5 No:10 2011Vol:5 No:09 2011Vol:5 No:08 2011Vol:5 No:07 2011Vol:5 No:06 2011Vol:5 No:05 2011Vol:5 No:04 2011Vol:5 No:03 2011Vol:5 No:02 2011Vol:5 No:01 2011
Vol:4 No:12 2010Vol:4 No:11 2010Vol:4 No:10 2010Vol:4 No:09 2010Vol:4 No:08 2010Vol:4 No:07 2010Vol:4 No:06 2010Vol:4 No:05 2010Vol:4 No:04 2010Vol:4 No:03 2010Vol:4 No:02 2010Vol:4 No:01 2010
Vol:3 No:12 2009Vol:3 No:11 2009Vol:3 No:10 2009Vol:3 No:09 2009Vol:3 No:08 2009Vol:3 No:07 2009Vol:3 No:06 2009Vol:3 No:05 2009Vol:3 No:04 2009Vol:3 No:03 2009Vol:3 No:02 2009Vol:3 No:01 2009
Vol:2 No:12 2008Vol:2 No:11 2008Vol:2 No:10 2008Vol:2 No:09 2008Vol:2 No:08 2008Vol:2 No:07 2008Vol:2 No:06 2008Vol:2 No:05 2008Vol:2 No:04 2008Vol:2 No:03 2008Vol:2 No:02 2008Vol:2 No:01 2008
Vol:1 No:12 2007Vol:1 No:11 2007Vol:1 No:10 2007Vol:1 No:09 2007Vol:1 No:08 2007Vol:1 No:07 2007Vol:1 No:06 2007Vol:1 No:05 2007Vol:1 No:04 2007Vol:1 No:03 2007Vol:1 No:02 2007Vol:1 No:01 2007