Experimental Study on Using the Aluminum Sacrificial Anode as a Cathodic Protection for Marine Structures
 D.A. ShiXer, Understanding material interactions in marine environments to promote extended structural life, Corrosion Science, Vol. 47, pp. 2335–2352, 2005.
 T.H. Rogers, Marine Corrosion, Science and technology, George Newnes Ltd, London, UK, 1974.
 F.L. Laque, Marine Corrosion, Causes and prevention, John Wiley & Sons, N.Y, 1975.
 S.W. Boronstein. “Microbiologically Influenced Corrosion Handbook”, Industrial Press, N.Y, USA, 1994.
 De Baere, Kris, Helen Verstraelen, Philippe Rigo, Steven Van Passel, Silvia Lenaerts, and Geert Potters. "Reducing the cost of ballast tank corrosion: an economic modeling approach", Marine Structures, Vol. 32, pp. 136-152, 2013.
 C.G. Soares, Y. Garbatov, A. Zayed and G. Wang. “Influence of environmental factors on corrosion of ship structures in marine Atmosphere”. Corrosion Science, Vol. 51, pp. 2014–2026, 2009.
 V. Ashworth and C.J. “Booker (eds), Cathodic Protection Theory and Practice”, Eills Herwood Ltd, Chichester, U.K, 1986.
 M.T. Gudze and R.E. Melchers. “Operational based corrosion analysis in naval ships”, Corrosion Science, Vol. 50, pp. 3296–3307, 2008.
 P. Muhamed Ashraf and S.M.A. Shibli. “Reinforcing aluminium with cerium oxide: A new and effective technique to prevent corrosion in marine environments”, Electrochemistry Communications, Vol. 9, pp. 443–448, 2007.
 A. Benedetti, L. Magagnin, F. Passaretti, E. Chelossi, M. Faimali and G. Montesperell. “Cathodic protection of carbon steel in natural seawater: Effect of sunlight radiation”, Electrochimica Acta, Vol. 54, pp. 6472–6478, 2009.
 M. Shehadeh, A. H. ElBatran and M. Anany. “Corrosion Fitness-for-Service Assessment of Pipelines Using a New Algorithm”, Proceedings 21st international conference on computer theory and applications (ICCTA 2011), Alexandria, Egypt, pp. 38-42, 15-17 Oct. 2011.
 C. Rousseau, F. Baraud, L. Leleyter, and O. Gil. “Cathodic protection by zinc sacrificial anodes: Impact on marine sediment metallic contamination”. Journal of hazardous materials, Vol. 167(1), pp. 953-958, 2009.
 De Baere, Kris Helen Verstraelen, Philippe Rigo, Steven Van Passel, Silvia Lenaerts, and Geert Potters. "Study on alternative approaches to corrosion protection of ballast tanks using an economic model." Marine Structures, Vol. 32, pp. 1-17, 2013.
 De Baere, Kris, Helen Verstraelen, Lucien Lemmens, Silvia Lenaerts, Raf Dewil, Yves Van Ingelgem, and Geert Potters. "A field study of the effectiveness of sacrificial anodes in ballast tanks of merchant ships." Journal of Marine Science and Technology, Vol. 19 (1), pp. 116-123, 2014.
 Kim, Seong Jong, Min Su Han, and Seung Jun Lee. "Effect of Zn Primer Coating on Electrochemical Properties in Seawater." In Advanced Materials Research, Trans Tech Publications, Vol. 811, pp. 46-53, 2013.
 A. Oryshchenko, and Yu L. Kuzmin. "Development of electrochemical cathodic protection against corrosion of ships, vessels, and offshore structures." Inorganic Materials: Applied Research, Vol. 6 (6), pp. 612-625, 2015.
 Druschitz, Alan P., Myrissa Maxfield, William Monzel, and Katie Tontodonato. "A Novel Approach for the Development of Low-Voltage, Aluminum, Sacrificial Anodes, CORROSION 2015, NACE International, 2015.
 I. Gurrappa, I. V. S. Yashwanth, and I. Mounika. "Cathodic Protection Technology for Protection of Naval Structures against Corrosion", Proceedings of the National Academy of Sciences, India Section A: Physical Sciences, Vol. 85 (1), pp. 1-18, 2015.
 M. Shehadeh, and I. Hassan. "Study of sacrificial cathodic protection on marine structures in sea and fresh water in relation to flow conditions." Ships and Offshore Structures, Vol. 8 (1), pp. 102-110, 2013.
 A. El-Shenawy, and M. Shehadeh. “Prognosis the Erosion-Corrosion Rates for Slurry Seawater Flow in Steel Pipeline Using Neural System”, Advanced Materials Research, Vols. 1025-1026, pp. 355-360, 2014.
 M. Shehadeh, M. Anany, Khalid M. Saqr and I. Hassan. “Experimental investigation of erosion-corrosion phenomena in a steel fitting due to Plain and slurry seawater flow”. International Journal of Mechanical and Materials Engineering, Vol. 9 (1), pp. 1-8, 2014.
 M. El-Zebda, M. Shehadeh, and I. Hassan. “Investigating of Erosion Corrosion in Horizontal Steel Pipes with Slurry Seawater Flow”, International Review of Chemical Engineering, Vol. 6 (3), pp. 117-121, 2014.
 A. I. Shahata, M. Talaat Youssef, Khalid Saqr and Mohamed Shehadeh. “CFD Investigation of Slurry Seawater Flow Effect in Steel Elbows”, International Journal of Engineering Research & Technology, Vol. 3 (1), pp. 364-370, 2014.
 A. El-Shenawy, M. Elghamry, M. Shehadeh. “Predicting the Iron Losses from Horizontal Steel pipes Due to Erosive Environment Using New Algorithm”, WIT Transactions on The Built Environment “, Vol. 156, pp. 177-183, 2014.
 D. A. Jones, Principles and Prevention of Corrosion, Macmillan Publishing Co., N.Y, USA, 1992.
 J.M. Bridges, Code of Practice for the design, installation and operation of cathodic protection systems in ships, Witherby & Co. Ltd., London, UK, 1982.
 J. Morgan. “Cathodic Protection”, 3rd edn, NACE, TX, USA, 1987.
 F. P. Incropera and D. P. De Witt. “Fundamentals of Heat and Mass Transfer”, 3rd edn, John Wiley&sons, N.Y, USA, 1990.
 K.J. Kennelly, R.H. Hausler and D.C. Silverman. “Flow Induced Corrosion”, Proceedings of NACE, TX, USA, 1991.