Numerical Model of Low Cost Rubber Isolators for Masonry Housing in High Seismic Regions
 R. P. Nanda, M. Shrikhande, and P. Agarwal, “Low-cost base-isolation
system for seismic protection of rural buildings,” Practice Periodical on
Structural Design and Construction, vol. 21, no. 1, p. 04015001, 2015.
 T. Boen, Yogya Earthquake 27 May 2006: Structural Damage Report.
 J. M. Kelly, “Earthquake-resistant design with rubber,” 1993.
 A. Das, S. K. Deb, and A. Dutta, “Shake table testing of un-reinforced
brick masonry building test model isolated by u-frei,” Earthquake
Engineering & Structural Dynamics, vol. 45, no. 2, pp. 253–272, 2016.
 N. C. Van Engelen, P. M. Osgooei, M. J. Tait, and D. Konstantinidis,
“Experimental and finite element study on the compression properties
of modified rectangular fiber-reinforced elastomeric isolators (mr-freis),”
Engineering Structures, vol. 74, pp. 52–64, 2014.
 A. Turer and B. O¨ zden, “Seismic base isolation using low-cost scrap
tire pads (stp),” Materials and Structures, vol. 41, no. 5, pp. 891–908,
 M. Spizzuoco, A. Calabrese, and G. Serino, “Innovative low-cost
recycled rubber–fiber reinforced isolator: experimental tests and finite
element analyses,” Engineering Structures, vol. 76, pp. 99–111, 2014.
 H. Toopchi-Nezhad, M. J. Tait, and R. G. Drysdale, “Testing
and modeling of square carbon fiber-reinforced elastomeric seismic
isolators,” Structural Control and Health Monitoring, vol. 15, no. 6,
pp. 876–900, 2008.
 M. Kumar, A. S. Whittaker, and M. C. Constantinou, “An advanced
numerical model of elastomeric seismic isolation bearings,” Earthquake
Engineering & Structural Dynamics, vol. 43, no. 13, pp. 1955–1974,
 M. Shahzad, A. Kamran, M. Z. Siddiqui, and M. Farhan, “Mechanical
characterization and fe modelling of a hyperelastic material,” Materials
Research, vol. 18, no. 5, pp. 918–924, 2015.
 D. Simulia, “Abaqus 6.13 users manual,” Dassault Systems, Providence,
 S. Jerrams, M. Kaya, and K. Soon, “The effects of strain rate and
hardness on the material constants of nitrile rubbers,” Materials &
design, vol. 19, no. 4, pp. 157–167, 1998.
 A. Calabrese, M. Spizzuoco, G. Serino, G. Della Corte, and
G. Maddaloni, “Shaking table investigation of a novel, low-cost, base
isolation technology using recycled rubber,” Structural Control and
Health Monitoring, vol. 22, no. 1, pp. 107–122, 2015.
 H. K. Mishra, A. Igarashi, and H. Matsushima, “Finite element analysis
and experimental verification of the scrap tire rubber pad isolator,”
Bulletin of Earthquake Engineering, pp. 1–21, 2013.
 G. Milani and F. Milani, “Stretch–stress behavior of elastomeric seismic
isolators with different rubber materials: numerical insight,” Journal of
Engineering Mechanics, vol. 138, no. 5, pp. 416–429, 2011.
 T. Choudhury, G. Milani, and H. B. Kaushik, “Comprehensive numerical
approaches for the design and safety assessment of masonry buildings
retrofitted with steel bands in developing countries: The case of india,”
Construction and Building Materials, vol. 85, pp. 227–246, 2015.
 S. Tiberti, M. Acito, and G. Milani, “Comprehensive fe numerical
insight into finale emilia castle behavior under 2012 emilia romagna
seismic sequence: damage causes and seismic vulnerability mitigation
hypothesis,” Engineering Structures, vol. 117, pp. 397–421, 2016.