National Research Council (NRC), Protecting People from Bomb Damage: Transfer of Blast-Effects Mitigation from Military to Civilian Applications, National Academy Press, Washington, DC, (1995).
 Remennikov, A. Carolan, D. (2005). Building vulnerability design against terrorist attacks.In M. Stewart, B. Dockrill (Eds.). // Proceedings of the Australian Structural Engineering Conference 2005, pp. 1-10, Australia: Tour Hosts Pty. Ltd.
 Hrvoje Draganić, Vladimir Sigmund, Blast Loading on Structures, Djelovanjeeksplozijanakonstrukcije. //Tehničkivjesnik.19, 3(2012), pp. 643-652.
 B.M. Luccioni, R.D. Ambrosini, R.F. Danesi. Analysis of building collapse under blast loads.// Engineering Structures. 26, (2004), pp. 63–71.
 J.Y. Richard Liew, Survivability of steel frame structures subject to blast and fire. // Journal of Constructional Steel Research. 64, (2008), pp. 854–866
 Zhang Xiuhua, Duan Zhongdong and Zhang Chunwei, Numerical Simulation of Dynamic Response and Collapse for Steel Frame Structures Subjected to Blast Load. // Trans. Tianjin Univ. 14, (2008), pp. 523-529
 TapanSabuwala, Daniel Linzell, Theodor Krauthammer, Finite element analysis of steel beam to column connections subjected to blast loads. // International Journal of Impact Engineering. 31, (2005),pp. 861–876
 Girum S. Urgessan, Tomasz Arciszewski, Blast response comparison of multiple steel frame connections. // Finite Elements in Analysis and Design, 47, (2011),pp. 668–675.
 Mohammad Abdallah, Bashir H. Osman. A methodology for evaluating dynamic responses of steel columns subjected to blast load under different situations. // The IES Journal Part A: Civil & Structural Engineering, (2015).
 Ding, Y., M. Wang, Z. X. Li, H. Hao.. Damage Evaluation of the Steel Tubular Column Subjected to Explosion and Post-explosion Fire Condition. // Engineering Structures.55, (2013), pp. 44_55.
 Astarlioglu, S., T. Krauthammer, D. Morency, and T. P. Tran. Behavior of Reinforced Concrete Columns under Combined Effects of Axial and Blast-Induced Transverse Loads. // Engineering Structures.55, (2013), pp. 26_34.
 Hwang, Y. S. Three Dimensional Responses of a Steel Structure under Blast Loads. // PhD thesis, University of Southern California.2010
 Kingery C. N., Bulmash G. Technical report ARBRL-TR-02555: Air blast parameters from TNT spherical air burst and hemispherical burst.AD-B082 713, U.S. Army Ballistic Research Laboratory, Aberdeen Proving Ground, MD. (1984).
 U.S. Department of the Army. Structures to resist the effects of accidental explosions. // Technical Manual (1990), pp. 5-1300.
 Unified Facilities Criteria. UFC 3-340-02 Structures toResist the Effects of Accidental Explosions. // U.S. Army Corps of Engineers, Naval Facilities Engineering Command, Air Force Civil Engineer Support Agency. (2008).
 ARA. Products, Software, Blast Design Software, A.T.-Blast. Applied Research Associates: http://www.ara.com/ products/AT-blast.htm. (2014).
 Jones N. Structural impact. Cambridge, New York: Cambridge University Press; 1988.
 Ngo, T. Mendis, P. Gupta, A. &Ramsay, J. Blast Loading and Blast Effects on Structures - An Overview. //EJSE Special Issue: Loading on Structures.(2007)
 Johnson GR, Cook WH. A constitutive model and data for metals subjected to large strains, high strain rate and high temperatures. // Proceeding of the 7th international symposium on ballistics, Hugue, Netherlands, (1983).
 Yuen SCK, Nurick GN. Experimental and numerical studies on the response of quadrangular stiffed plats. Part I: subjected to uniform blast load. // Int J Impact Eng. 31, (2005), pp. 55–83.
 Johnson GR, Cook WH. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. // EngFract Mech. 21, 1(1985), pp. 31–48.
 Yuen SCK, Nurick GN, Verster W, et al. Deformation of mild steel plates subjected to large-scaled explosions. // Int J Impact Eng. 35, (2008), pp. 684–703.
 Leeco Steel. S275 Steel Plates, URL: http://www.leecosteel.com/s275-steel-plate.html
 Schwer L. Optional strain-rate forms for the Johnson Cook constitutive model and the role of the parameter Epsilon. // Proceeding of the 6th LS-DYNA Anwenderforum, Frankenthal, German; (2007).
 Seidt JD. EOD material characterization, supplemental reports: constitutive and fracture models for ASTM A36 hot rolled steel. Battelle Technical report prepared for the Naval Explosive Ordnance Disposal Technology Division, Columbus, Ohio; (November 2005).
 Dassault Syst_emes Simulia Corp. Abaqus Version 6.13-1, Abaqus Analysis User’s Manual, Abaqus Keywords Reference Manual, Abaqus Example Problems Manual, Dassault Systemes Simulia Corp. (2013).
 M. M. Abdallah, B. H. Osman. Advanced Materials and Structural Engineering. // Proceedings of the International Conference on Advanced Materials and Engineering Structural Technology (ICAMEST).(2015), Qingdao, China.
 Mays, G. C., and P. D. Smith. Blast Effects on Buildings Design of Buildings to Optimize Resistance to Blast Loading. London: Tomas Telford. (1995).
 Structural use of steelwork in building, BS 5950-1:2000, Part 1: Code of practice for design, Rolled and welded sections, (May 2001).
 The British Constructional Steelwork Association Ltd and the Steel Construction Institute, Hand book of structural steel work 4th edition. (2007).
 Bryan Stafford Smith, Alex Coull. Tall Building Structures: Analysis and Design. Awiley-Interscience Publication, USA. (1991).