Open Science Research Excellence

Open Science Index

Commenced in January 2007 Frequency: Monthly Edition: International Publications Count: 31176


Select areas to restrict search in scientific publication database:
10011804
Penetration Analysis for Composites Applicable to Military Vehicle Armors, Aircraft Engines and Nuclear Power Plant Structures
Authors:
Abstract:
This paper describes a method for analyzing penetration for composite material using an explicit nonlinear Finite Element Analysis (FEA). This method may be used in the early stage of design for the protection of military vehicles, aircraft engines and nuclear power plant structures made of composite materials. This paper deals with simple ballistic penetration tests for composite materials and the FEA modeling method and results. The FEA was performed to interpret the ballistic field test phenomenon regarding the damage propagation in the structure subjected to local foreign object impact.
Digital Object Identifier (DOI):

References:

[1] R. A. Mankarious, M. A. Radwan, M. Shazly and H. A. Elazab, “Bullet proof Vests/Shields Prepared from Composite Material based on Strong Polyamide Fibers and Epoxy Resin,” Journal of Engineering and Applied Science, vol. 12, no. 10, pp. 2697-2701, 2017
[2] T. Fiedler and T. Verstegen, “Fibre-Reinforced Composite for Protection against Shark Bites,” Materials, vol. 13, no. 22, 2020
[3] B. L. Lee, T. F. Walsh, S. T. Won, H. M, Patts, J. W. Song and A. H. Mayer, “Penetration Failure Mechanism of Armor-Grade Fiber Composites under Impact,” Journal of Composite Materials, vol. 35, no. 18, pp. 1605-1633, 2001
[4] M. Muller, U. Dierkes and J. Hampel, “Blast Protection in Military Land Vehicle Programs: Approach, Methodology and Testing,” WIT Transactions on State of the Art in Science and Engineering, vol. 60, 2012.
[5] V. Madhu and T.B. Bhat, “Armour Protection and Affordable Protection for Futuristic Combat Vehicle,” Defense Science Journal, vol. 61, no. 4, pp. 394-402, 2011
[6] H. Cho, J. Lee, S. Hong and S. Kim, “Bulletproof Performance of Composite Plate Fabricated Using Shear Thickening Fluid and Natural Fiber Paper,” Applied Science, vol. 10, no. 88, 2020.
[7] Y. Regassa, “Modeling and Simulation of Bullet Resistant Composite Body Armor,” Global Journal of Researches in Engineering: A Mechanical and Mechanics Engineering, vol. 16, no. 3, 2016.
[8] F.S.D. Luz, E.P.L. Junior, L.H.L. Louro, S.N. Monteiro, “Ballistic Test of Multilayered Armor with Intermediate Epoxy Composite Reinforced with Jute Fabric,” Materials Research, vol. 18, pp.170-177, 2015
[9] https://below-the-turret-ring.blogspot.com/2016/10/puma-ifv-armor-and-upgrade-speculations.html
[10] https://steemit.com/science/@asbonclz/lightweight-ceramics-and-its-advanced-application-in-modern-military-armors
[11] T.Yotsuya, K. Murayama, J. Miura, A. Jakajima, J. Kawahata, “Design Concept of Composite Module for Nuclear Power Plant construction,” 12th International conference on Nuclear Engineering, pp. 449-452, 2004
[12] R. Venugopalan, D. Sathiyamoorthy, “Development of Carbon / Carbon Composites for Nuclear Reactor Applications,” BARC News Letter, vol. 325, pp. 16-20, 2012.
[13] R.V. Fedorenko, A.A. Kudryavtsev, A.V. Lukin, V.S. Modestove, I.R. Murtazin, “Strength analysis of nuclear power plant structures in case of aircraft crash impact,” Procedia Structural Integrity, vol. 6, pp. 244-251, 2017
[14] H. Jiang, M.G. Chorzepa, “Aircraft impact analysis of nuclear safety-related concrete structure: A review,” Engineering Failure Analysis, vol. 46, pp. 118-133, 2014
[15] https://science.howstuffworks.com/nuclear-reactor2.htm
[16] D.S., Cronin, et al., "Implementation and Validation of the Johnson-Holmquist Ceramic Material Model in LS-Dyna," 4th European LS-DYNA Users Conference
[17] W.Y., Li, et al., "Modeling on Deformation Behavior of Al Particles Impacting on Al Substrate Effect of Surface Oxide Films on Interfacial Bonding in Cold Spraying,"
[18] B.S., Thatte, et al., "Studies on Behavior of Carbon and Fiberglass Epoxy Composite Laminates under Low Velocity Impact Loading using LS-DYNA," 10th International LS-DYNA Users Conference
[19] C.F., Yen, "Ballistic Impact Modeling of Composite Materials," 7th International LS-DYNA Users Conference
[20] Z.D., Ma, et al., "Designing an Innovative Composite Armor System for Affordable Ballistic Protection," 25th Army Science Conference, November 27-30, 2006, Orlando, Florida.
[21] G.D. Roberts, D.M. Revilock, W.K. Binienda, W. Z. Nie, “Impact Testing and Analysis of Composites for Aircraft Engine Fan Cases,” Journal of Aerospace engineering, vol. 15, no. 3, 2002.
[22] J. Xing, C. Du, X. He, Z. Zhao, C. Zhang and Y. Li, “Finite Element Study on the Impact Resistance of Laminated and Textile Composites,” Polymer(Basel), vol. 11, no. 11, 2019.
Vol:15 No:04 2021Vol:15 No:03 2021Vol:15 No:02 2021Vol:15 No:01 2021
Vol:14 No:12 2020Vol:14 No:11 2020Vol:14 No:10 2020Vol:14 No:09 2020Vol:14 No:08 2020Vol:14 No:07 2020Vol:14 No:06 2020Vol:14 No:05 2020Vol:14 No:04 2020Vol:14 No:03 2020Vol:14 No:02 2020Vol:14 No:01 2020
Vol:13 No:12 2019Vol:13 No:11 2019Vol:13 No:10 2019Vol:13 No:09 2019Vol:13 No:08 2019Vol:13 No:07 2019Vol:13 No:06 2019Vol:13 No:05 2019Vol:13 No:04 2019Vol:13 No:03 2019Vol:13 No:02 2019Vol:13 No:01 2019
Vol:12 No:12 2018Vol:12 No:11 2018Vol:12 No:10 2018Vol:12 No:09 2018Vol:12 No:08 2018Vol:12 No:07 2018Vol:12 No:06 2018Vol:12 No:05 2018Vol:12 No:04 2018Vol:12 No:03 2018Vol:12 No:02 2018Vol:12 No:01 2018
Vol:11 No:12 2017Vol:11 No:11 2017Vol:11 No:10 2017Vol:11 No:09 2017Vol:11 No:08 2017Vol:11 No:07 2017Vol:11 No:06 2017Vol:11 No:05 2017Vol:11 No:04 2017Vol:11 No:03 2017Vol:11 No:02 2017Vol:11 No:01 2017
Vol:10 No:12 2016Vol:10 No:11 2016Vol:10 No:10 2016Vol:10 No:09 2016Vol:10 No:08 2016Vol:10 No:07 2016Vol:10 No:06 2016Vol:10 No:05 2016Vol:10 No:04 2016Vol:10 No:03 2016Vol:10 No:02 2016Vol:10 No:01 2016
Vol:9 No:12 2015Vol:9 No:11 2015Vol:9 No:10 2015Vol:9 No:09 2015Vol:9 No:08 2015Vol:9 No:07 2015Vol:9 No:06 2015Vol:9 No:05 2015Vol:9 No:04 2015Vol:9 No:03 2015Vol:9 No:02 2015Vol:9 No:01 2015
Vol:8 No:12 2014Vol:8 No:11 2014Vol:8 No:10 2014Vol:8 No:09 2014Vol:8 No:08 2014Vol:8 No:07 2014Vol:8 No:06 2014Vol:8 No:05 2014Vol:8 No:04 2014Vol:8 No:03 2014Vol:8 No:02 2014Vol:8 No:01 2014
Vol:7 No:12 2013Vol:7 No:11 2013Vol:7 No:10 2013Vol:7 No:09 2013Vol:7 No:08 2013Vol:7 No:07 2013Vol:7 No:06 2013Vol:7 No:05 2013Vol:7 No:04 2013Vol:7 No:03 2013Vol:7 No:02 2013Vol:7 No:01 2013
Vol:6 No:12 2012Vol:6 No:11 2012Vol:6 No:10 2012Vol:6 No:09 2012Vol:6 No:08 2012Vol:6 No:07 2012Vol:6 No:06 2012Vol:6 No:05 2012Vol:6 No:04 2012Vol:6 No:03 2012Vol:6 No:02 2012Vol:6 No:01 2012
Vol:5 No:12 2011Vol:5 No:11 2011Vol:5 No:10 2011Vol:5 No:09 2011Vol:5 No:08 2011Vol:5 No:07 2011Vol:5 No:06 2011Vol:5 No:05 2011Vol:5 No:04 2011Vol:5 No:03 2011Vol:5 No:02 2011Vol:5 No:01 2011
Vol:4 No:12 2010Vol:4 No:11 2010Vol:4 No:10 2010Vol:4 No:09 2010Vol:4 No:08 2010Vol:4 No:07 2010Vol:4 No:06 2010Vol:4 No:05 2010Vol:4 No:04 2010Vol:4 No:03 2010Vol:4 No:02 2010Vol:4 No:01 2010
Vol:3 No:12 2009Vol:3 No:11 2009Vol:3 No:10 2009Vol:3 No:09 2009Vol:3 No:08 2009Vol:3 No:07 2009Vol:3 No:06 2009Vol:3 No:05 2009Vol:3 No:04 2009Vol:3 No:03 2009Vol:3 No:02 2009Vol:3 No:01 2009
Vol:2 No:12 2008Vol:2 No:11 2008Vol:2 No:10 2008Vol:2 No:09 2008Vol:2 No:08 2008Vol:2 No:07 2008Vol:2 No:06 2008Vol:2 No:05 2008Vol:2 No:04 2008Vol:2 No:03 2008Vol:2 No:02 2008Vol:2 No:01 2008
Vol:1 No:12 2007Vol:1 No:11 2007Vol:1 No:10 2007Vol:1 No:09 2007Vol:1 No:08 2007Vol:1 No:07 2007Vol:1 No:06 2007Vol:1 No:05 2007Vol:1 No:04 2007Vol:1 No:03 2007Vol:1 No:02 2007Vol:1 No:01 2007