Preparation and Characterization of Pectin Based Proton Exchange Membranes Derived by Solution Casting Method for Direct Methanol Fuel Cells
References:
[1] V. Neburchilov, J. Martin, H. Wang, J. Zhang, “A review of polymer electrolyte membranes for direct methanol fuel cells,” J. Power Sources., vol.169, no., pp. 221–238, Apr. 2007.
[2] V. Radenahmad, A. Afif, P. I. Petra, S.M.H. Rahman, S. G. Eriksson, A. K. Azad, “Proton-conducting electrolytes for direct methanol and direct urea fuel cells-A state-of-the-art review,” Renew. Sustainable Energy Rev., vol.57, no., pp.1347–1358, May. 2016.
[3] S. P. Jiang, Z. G. Liu, Z. Q. Tian, “Layer-by-Layer Self-Assembly of Composite Polyelectrolyte–Nafion Membranes for Direct Methanol Fuel Cells” Adv. Mater., vol.18, no.8, pp.1068–1072, Apr 2006.
[4] A. Muthumeenal, S. Neelakandan, P. Kanagaraj, A. Nagendran, “Synthesis and properties of novel proton exchange membranes based on sulfonated polyethersulfone and N-phthaloyl chitosan blends for DMFC applications” Renew. Energy., vol.86, pp.922–929, Sep 2016.
[5] S. Mohanapariya, S. D. Bhat, A. K. Sahu, S. Pitchumani, P. Sridhar and A. K. Shukla, “A New mixed matrix membrane for DMFCs” Energy and Environ.Sci., vol. 2, no.11, pp.1210–1216, Sep 2009.
[6] S. Mohanapariya, A. K. Sahu, S. D. Bhat, S. Pitchumani, P. Sridhar, C. George, N. Chandrakumar and A. K. Shukla, “Bio-composite membrane Electrolytes for Direct Methanol Fuel Cells”, J. Electrochem. Soc., vol.158, no.11, pp. B1319–B1328, Sep 2011.
[7] R. K. Mishra, A. Anis, S. Mondal, M. Dutt, A. K. Banthia, “Preparation and Characterization of Amidated Pectin based Polymer Electrolyte Membranes”, Chinese J. Polym.Sci., vol.27, no.5, pp.639–646, Oct 2009.
[8] C. Deina, E. Fois, S. Coluccia, G. Martra, “Surface structure of TiO2 P25 Nanoparticles: Infrared study of Hydroxy Groups on Coordinative Defect Sites J. Phy. Chem C., vol.114, no.49, pp.21531–21538, Nov 2010.
[9] M. Sairam, M.B. Patil, R. S. Veerapur, S. A. Patil, T. M. Aminabhavi, “Novel dense poly(vinyl alcohol)–TiO2 mixed matrix membranes for pervaporation separation of water–isopropanol mixtures at 30°C”, J. Membr. Sci., vol.281, no.1, pp.95-102, Sep 2006.