Open Science Research Excellence

Open Science Index

Commenced in January 2007 Frequency: Monthly Edition: International Publications Count: 31181

Select areas to restrict search in scientific publication database:
Seismic Performance Evaluation of the Composite Structural System with Separated Gravity and Lateral Resistant Systems
During the process of the industrialization of steel structure housing, a composite structural system with separated gravity and lateral resistant systems has been applied in engineering practices, which consists of composite frame with hinged beam-column joints, steel brace and RC shear wall. As an attempt in steel structural system area, seismic performance evaluation of the separated composite structure is important for further application in steel housing. This paper focuses on the seismic performance comparison of the separated composite structural system and traditional steel frame-shear wall system under the same inter-story drift ratio (IDR) provision limit. The same architectural layout of a high-rise building is designed as two different structural systems at the same IDR level, and finite element analysis using pushover method is carried out. Static pushover analysis implies that the separated structural system exhibits different lateral deformation mode and failure mechanism with traditional steel frame-shear wall system. Different indexes are adopted and discussed in seismic performance evaluation, including IDR, safe factor (SF), shear wall damage, etc. The performance under maximum considered earthquake (MCE) demand spectrum shows that the shear wall damage of two structural systems are similar; the separated composite structural system exhibits less plastic hinges; and the SF index value of the separated composite structural system is higher than the steel frame shear wall structural system.
Digital Object Identifier (DOI):


[1] Z. Ni, “Research on bearing capacity performance of the truss girder in the modular prefabricated steel structure,” Industrial Construction, vol. 44, no.8, pp. 14-18, 2014
[2] A. L. Zhang, “Pseudo dynamic tests for a resilient prefabricated prestressed steel frame,” Journal of Vibration and Shock, vol. 35, no. 5, pp. 207-215, 2016.
[3] Y. L. Guo, “Design theory of assembled buckling-restrained braces and buckling-restrained braced frames,” Structural Engineers, vol. 16, no.6, pp.164-176, 2010.
[4] X. C. Liu, “Experimental study on static and seismic performance of bolted joint in modularized multi-layer and high-rise prefabricated steel structures,” Journal of Building Structures, vol. 36, no. 12, pp.43-51, 2015.
[5] J. P. Hao, “Research and applications of prefabricated steel structure building systems,” Engineering Mechanics, vol.34, no.1, pp. 1-13, 2017.
[6] Y. B. Li, “Experiment on seismic performance of bundled lipped channel-concrete composite wall and beam-flange-strengthened connections,” Journal of Tianjin University, vol.49, no.S1, pp.41-47, 2016.
[7] “Code for anti-collapse design of building structures: CECS 392:2014”, Beijing, China Planning Press, 2014.
[8] C. Xiong, “Damage assessment of shear wall components for RC frame–shear wall buildings using story curvature as engineering demand parameter,” Engineering Structure, vol.189, no.12, pp.77-88, 2019.
[9] F. G. Martínez, “Flavia De Luca, Gerardo M. Verderame. Seismic performances and behaviour factor of wide-beam and deep-beam RC frames,” Engineering Structures, vol.125, no.20, pp.107-123, 2016.
[10] “Code for seismic design of buildings:GB 50011-2010”, Beijing, China Architecture & Building Press, 2010.
[11] “Code for design of composite structures: JGJ 138-2016”, Beijing, China Architecture & Building Press, 2016.
[12] M. X. Tao, “Theory of seismic response analysis of steel-concrete composite structures using fiber beam elements” Journal of Building Structures, vol. 32, no.10, pp.1-10, 2011.
[13] M. X. Tao, “Application of seismic response analysis of steel-concrete composite structures using fiber beam elements” Journal of Building Structures, vol. 32, no.10, pp.11-20, 2011.
[14] Z. W. Miao, “Applications of the multi-layer shell element in the finite element analysis of shear wall structures,” in Proceedings of 9th National Academic Conference on basic Theory and Engineering Application of Concrete Structure, Beijing, pp.932-935, 2006.
[15] Rusch H. “Researches toward a general flexural theory for structural concrete,” Journal of the American Concrete Institute, vol.57, no.7, pp.1-28, 1960.
[16] Esmaeily A. “Behavior of reinforced concrete columns under variable axial loads: analysis,” ACI Structural Journal,” vol.102, no.5, pp.736-744, 2005.
[17] Y. L. Huang, “A pushover analysis algorithm based on multiple point constraints,” Engineering Mechanics, vol.28, no.2, pp.18-23, 2011.
[18] “Seismic Evaluation and Retrofit of Concrete Buildings, Volume1: ATC-40”, California: Applied Technology Council, 1996
[19] X. Z. Lu, “Elasto-plastic analysis of buildings against earthquake – theory model and implementation on ABAQUS, MSC.MARC and SAP2000,” Beijing: China Architecture & Building Press. 2009,”
[20] FEMA. NEHRP Guidelines for the Seismic Rehabilitation of Buildings: FEMA-273, Washington DC: Federal Emergency Management Agency; 1997.
[21] FEMA. NEHRP Commentary on the Guidelines for the Seismic Rehabilitation of Buildings: FEMA-274, Washington DC: Federal Emergency Management Agency, 1997.
[22] FEMA. Seismic performance assessment of buildings: Volume 1 : Methodology: FEMA P-58-1. Washington DC: Federal Emergency Management Agency; 2012.
[23] X. D. Ji, “Seismic performance evaluation of a high-rise building with novel hybrid coupled walls,” Engineering Structures, vol.169, no.16, pp.216-225, 2018.
[24] M. Dolšek, “IN2 – A simple alternative for IDA,” in 13th World Conference on Earthquake Engineering. Vancouver, Canada: Canadian Association for Earthquake Engineering, pp.1-15, 2004.
Vol:15 No:04 2021Vol:15 No:03 2021Vol:15 No:02 2021Vol:15 No:01 2021
Vol:14 No:12 2020Vol:14 No:11 2020Vol:14 No:10 2020Vol:14 No:09 2020Vol:14 No:08 2020Vol:14 No:07 2020Vol:14 No:06 2020Vol:14 No:05 2020Vol:14 No:04 2020Vol:14 No:03 2020Vol:14 No:02 2020Vol:14 No:01 2020
Vol:13 No:12 2019Vol:13 No:11 2019Vol:13 No:10 2019Vol:13 No:09 2019Vol:13 No:08 2019Vol:13 No:07 2019Vol:13 No:06 2019Vol:13 No:05 2019Vol:13 No:04 2019Vol:13 No:03 2019Vol:13 No:02 2019Vol:13 No:01 2019
Vol:12 No:12 2018Vol:12 No:11 2018Vol:12 No:10 2018Vol:12 No:09 2018Vol:12 No:08 2018Vol:12 No:07 2018Vol:12 No:06 2018Vol:12 No:05 2018Vol:12 No:04 2018Vol:12 No:03 2018Vol:12 No:02 2018Vol:12 No:01 2018
Vol:11 No:12 2017Vol:11 No:11 2017Vol:11 No:10 2017Vol:11 No:09 2017Vol:11 No:08 2017Vol:11 No:07 2017Vol:11 No:06 2017Vol:11 No:05 2017Vol:11 No:04 2017Vol:11 No:03 2017Vol:11 No:02 2017Vol:11 No:01 2017
Vol:10 No:12 2016Vol:10 No:11 2016Vol:10 No:10 2016Vol:10 No:09 2016Vol:10 No:08 2016Vol:10 No:07 2016Vol:10 No:06 2016Vol:10 No:05 2016Vol:10 No:04 2016Vol:10 No:03 2016Vol:10 No:02 2016Vol:10 No:01 2016
Vol:9 No:12 2015Vol:9 No:11 2015Vol:9 No:10 2015Vol:9 No:09 2015Vol:9 No:08 2015Vol:9 No:07 2015Vol:9 No:06 2015Vol:9 No:05 2015Vol:9 No:04 2015Vol:9 No:03 2015Vol:9 No:02 2015Vol:9 No:01 2015
Vol:8 No:12 2014Vol:8 No:11 2014Vol:8 No:10 2014Vol:8 No:09 2014Vol:8 No:08 2014Vol:8 No:07 2014Vol:8 No:06 2014Vol:8 No:05 2014Vol:8 No:04 2014Vol:8 No:03 2014Vol:8 No:02 2014Vol:8 No:01 2014
Vol:7 No:12 2013Vol:7 No:11 2013Vol:7 No:10 2013Vol:7 No:09 2013Vol:7 No:08 2013Vol:7 No:07 2013Vol:7 No:06 2013Vol:7 No:05 2013Vol:7 No:04 2013Vol:7 No:03 2013Vol:7 No:02 2013Vol:7 No:01 2013
Vol:6 No:12 2012Vol:6 No:11 2012Vol:6 No:10 2012Vol:6 No:09 2012Vol:6 No:08 2012Vol:6 No:07 2012Vol:6 No:06 2012Vol:6 No:05 2012Vol:6 No:04 2012Vol:6 No:03 2012Vol:6 No:02 2012Vol:6 No:01 2012
Vol:5 No:12 2011Vol:5 No:11 2011Vol:5 No:10 2011Vol:5 No:09 2011Vol:5 No:08 2011Vol:5 No:07 2011Vol:5 No:06 2011Vol:5 No:05 2011Vol:5 No:04 2011Vol:5 No:03 2011Vol:5 No:02 2011Vol:5 No:01 2011
Vol:4 No:12 2010Vol:4 No:11 2010Vol:4 No:10 2010Vol:4 No:09 2010Vol:4 No:08 2010Vol:4 No:07 2010Vol:4 No:06 2010Vol:4 No:05 2010Vol:4 No:04 2010Vol:4 No:03 2010Vol:4 No:02 2010Vol:4 No:01 2010
Vol:3 No:12 2009Vol:3 No:11 2009Vol:3 No:10 2009Vol:3 No:09 2009Vol:3 No:08 2009Vol:3 No:07 2009Vol:3 No:06 2009Vol:3 No:05 2009Vol:3 No:04 2009Vol:3 No:03 2009Vol:3 No:02 2009Vol:3 No:01 2009
Vol:2 No:12 2008Vol:2 No:11 2008Vol:2 No:10 2008Vol:2 No:09 2008Vol:2 No:08 2008Vol:2 No:07 2008Vol:2 No:06 2008Vol:2 No:05 2008Vol:2 No:04 2008Vol:2 No:03 2008Vol:2 No:02 2008Vol:2 No:01 2008
Vol:1 No:12 2007Vol:1 No:11 2007Vol:1 No:10 2007Vol:1 No:09 2007Vol:1 No:08 2007Vol:1 No:07 2007Vol:1 No:06 2007Vol:1 No:05 2007Vol:1 No:04 2007Vol:1 No:03 2007Vol:1 No:02 2007Vol:1 No:01 2007