Open Science Research Excellence

Open Science Index

Commenced in January 2007 Frequency: Monthly Edition: International Publications Count: 31181

Select areas to restrict search in scientific publication database:
Simulation and Design of an Aerospace Mission Powered by “Candy” Type Fuel Engines
Sounding rockets are aerospace vehicles that were developed in the mid-20th century, and since then numerous investigations have been executed with the aim of innovate in this type of technology. However, the costs associated to the production of this type of technology are usually quite high, and therefore the challenge that exists today is to be able to reduce them. In this way, the main objective of this document is to present the design process of a Colombian aerospace mission capable to reach the thermosphere using low-cost “Candy” type solid fuel engines. This mission is the latest development of the Uniandes Aerospace Project (PUA for its Spanish acronym), which is an undergraduate and postgraduate research group at Universidad de los Andes (Bogotá, Colombia), dedicated to incurring in this type of technology. In this way, the investigations that have been carried out on Candy-type solid fuel, which is a compound of potassium nitrate and sorbitol, have allowed the production of engines powerful enough to reach space, and which represents a unique technological advance in Latin America and an important development in experimental rocketry. In this way, following the engineering iterative design methodology was possible to design a 2-stage sounding rocket with 1 solid fuel engine in each one, which was then simulated in RockSim V9.0 software and reached an apogee of approximately 150 km above sea level. Similarly, a speed equal to 5 Mach was obtained, which after performing a finite element analysis, it was shown that the rocket is strong enough to be able to withstand such speeds. Under these premises, it was demonstrated that it is possible to build a high-power aerospace mission at low cost, using Candy-type solid fuel engines. For this reason, the feasibility of carrying out similar missions clearly depends on the ability to replicate the engines in the best way, since as mentioned above, the design of the rocket is adequate to reach supersonic speeds and reach space. Consequently, with a team of at least 3 members, the mission can be obtained in less than 3 months. Therefore, when publishing this project, it is intended to be a reference for future research in this field and benefit the industry.
Digital Object Identifier (DOI):


[1] C. Cook, The Aerospace Industry: Its History and How it Affects the U.S. Economy, Yale-New Haven Teachers Institute, 2014.
[2] NASA, "La evolucion del cohete" 12 2001. (Online). Available:
[3] NASA, "NASA Sounding Rocket Program Overview," Dr. Robert F. Pfaff, 11 10 2019. (Online). Available:
[4] B. Dorminey, "Sounding Rockets Still Astronomy's Unsung Workhorses," Forbes, 06 2013. (Online). Available:
[5] S. Bluestone, "Project Bellerophon," University of Purdue, 2008.
[6] NASA, "The Tyranny of the Rocket Equation," 2012. (Online). Available:
[7] B. Bland, "Sounding Rocket Program Office," NASA, 2020. (Online). Available:
[8] W. H. Gerstenmaier, Interviewee, Centro de Comunicaciones de la Red del Espacio Profundo (DSN). (Interview). 09 2015.
[9] G. Sutton and O. Biblarz, Rocket Propulsion Elements, Wiley-lnterscience Publication, 2000.
[10] M. Simahan, "Design, Construction and Testing of a solid propellant engine," Universidad De Los Andes, 2017.
[11] R. Nakka, «Solid Rocket Motor Theory,» 07 2001. (En línea). Available: (Último acceso: 2020).
[12] C. Galarza y F. Rojas, «Design of a candy propellant rocket motor by a computer aided system and its performance in static testing» Universidad de los Andes, Bogota, 2015.
[13] R. Nakka, "Solid Rocket Motor Theory -- Propellant Grain," 05 07 2001. (Online). Available:
[14] D. Romero, "Diseño, Construcción y Pruebas de un Sistema de Propulsión a Combustible Sólido con Motores Illapa- 2 de 30kN de Empuje para Misiones Suborbitales," Universidad De Los Andes, Bogota D.C., 2019.
[15] M. Mendenhall, "Tactical missile aerodynamics," American Institute of Aeronautics and Astronautics, Prediction methodology, 1992.
[16] D. Hoover, "Ten pounds to ten thousand feets: Designing an inexpensive and reusable rocket," American Institute of Aeronautics and Astronautics, 2009.
[17] A. Saw and A. Mahdi Al-Obaidi, "Drag of Conical Nose at Supersonic Speeds," 04 2013. (Online). Available:
[18] G. Stroick and T. Minnesesota, Nose Cone & Fin Optimization, Off We Go Rocketry, 2011.
[19] G. Ciodaro, "Construccion y ensamble del fuselaje para el vehiculo AINKAA," Universidad De Los Andes, 2014.
[20] Apogee Rockets, "RockSim V9.0 Software," 2019. (Online). Available:
[21] NASA, "Wind Tunnel Testing Used to Understand the Unsteady Side of Aerodynamics," 3 11 2013. (Online). Available:
[22] NASA, "SLS Model 'Flies' Through Langley Wind Tunnel Testing," 28 11 2012. (Online). Available:
[23] S. Kilikevičius, A. Fedaravičius, A. Survila and L. Patašienė, "Analysis of Aerodynamic Characteristics of the Rocket-Target for the „Stinger” System," 2015.
Vol:15 No:04 2021Vol:15 No:03 2021Vol:15 No:02 2021Vol:15 No:01 2021
Vol:14 No:12 2020Vol:14 No:11 2020Vol:14 No:10 2020Vol:14 No:09 2020Vol:14 No:08 2020Vol:14 No:07 2020Vol:14 No:06 2020Vol:14 No:05 2020Vol:14 No:04 2020Vol:14 No:03 2020Vol:14 No:02 2020Vol:14 No:01 2020
Vol:13 No:12 2019Vol:13 No:11 2019Vol:13 No:10 2019Vol:13 No:09 2019Vol:13 No:08 2019Vol:13 No:07 2019Vol:13 No:06 2019Vol:13 No:05 2019Vol:13 No:04 2019Vol:13 No:03 2019Vol:13 No:02 2019Vol:13 No:01 2019
Vol:12 No:12 2018Vol:12 No:11 2018Vol:12 No:10 2018Vol:12 No:09 2018Vol:12 No:08 2018Vol:12 No:07 2018Vol:12 No:06 2018Vol:12 No:05 2018Vol:12 No:04 2018Vol:12 No:03 2018Vol:12 No:02 2018Vol:12 No:01 2018
Vol:11 No:12 2017Vol:11 No:11 2017Vol:11 No:10 2017Vol:11 No:09 2017Vol:11 No:08 2017Vol:11 No:07 2017Vol:11 No:06 2017Vol:11 No:05 2017Vol:11 No:04 2017Vol:11 No:03 2017Vol:11 No:02 2017Vol:11 No:01 2017
Vol:10 No:12 2016Vol:10 No:11 2016Vol:10 No:10 2016Vol:10 No:09 2016Vol:10 No:08 2016Vol:10 No:07 2016Vol:10 No:06 2016Vol:10 No:05 2016Vol:10 No:04 2016Vol:10 No:03 2016Vol:10 No:02 2016Vol:10 No:01 2016
Vol:9 No:12 2015Vol:9 No:11 2015Vol:9 No:10 2015Vol:9 No:09 2015Vol:9 No:08 2015Vol:9 No:07 2015Vol:9 No:06 2015Vol:9 No:05 2015Vol:9 No:04 2015Vol:9 No:03 2015Vol:9 No:02 2015Vol:9 No:01 2015
Vol:8 No:12 2014Vol:8 No:11 2014Vol:8 No:10 2014Vol:8 No:09 2014Vol:8 No:08 2014Vol:8 No:07 2014Vol:8 No:06 2014Vol:8 No:05 2014Vol:8 No:04 2014Vol:8 No:03 2014Vol:8 No:02 2014Vol:8 No:01 2014
Vol:7 No:12 2013Vol:7 No:11 2013Vol:7 No:10 2013Vol:7 No:09 2013Vol:7 No:08 2013Vol:7 No:07 2013Vol:7 No:06 2013Vol:7 No:05 2013Vol:7 No:04 2013Vol:7 No:03 2013Vol:7 No:02 2013Vol:7 No:01 2013
Vol:6 No:12 2012Vol:6 No:11 2012Vol:6 No:10 2012Vol:6 No:09 2012Vol:6 No:08 2012Vol:6 No:07 2012Vol:6 No:06 2012Vol:6 No:05 2012Vol:6 No:04 2012Vol:6 No:03 2012Vol:6 No:02 2012Vol:6 No:01 2012
Vol:5 No:12 2011Vol:5 No:11 2011Vol:5 No:10 2011Vol:5 No:09 2011Vol:5 No:08 2011Vol:5 No:07 2011Vol:5 No:06 2011Vol:5 No:05 2011Vol:5 No:04 2011Vol:5 No:03 2011Vol:5 No:02 2011Vol:5 No:01 2011
Vol:4 No:12 2010Vol:4 No:11 2010Vol:4 No:10 2010Vol:4 No:09 2010Vol:4 No:08 2010Vol:4 No:07 2010Vol:4 No:06 2010Vol:4 No:05 2010Vol:4 No:04 2010Vol:4 No:03 2010Vol:4 No:02 2010Vol:4 No:01 2010
Vol:3 No:12 2009Vol:3 No:11 2009Vol:3 No:10 2009Vol:3 No:09 2009Vol:3 No:08 2009Vol:3 No:07 2009Vol:3 No:06 2009Vol:3 No:05 2009Vol:3 No:04 2009Vol:3 No:03 2009Vol:3 No:02 2009Vol:3 No:01 2009
Vol:2 No:12 2008Vol:2 No:11 2008Vol:2 No:10 2008Vol:2 No:09 2008Vol:2 No:08 2008Vol:2 No:07 2008Vol:2 No:06 2008Vol:2 No:05 2008Vol:2 No:04 2008Vol:2 No:03 2008Vol:2 No:02 2008Vol:2 No:01 2008
Vol:1 No:12 2007Vol:1 No:11 2007Vol:1 No:10 2007Vol:1 No:09 2007Vol:1 No:08 2007Vol:1 No:07 2007Vol:1 No:06 2007Vol:1 No:05 2007Vol:1 No:04 2007Vol:1 No:03 2007Vol:1 No:02 2007Vol:1 No:01 2007